Size: One size though on the smaller side
Colour: available in Black, Red or Grey
Includes: One PM 2.5 filter 
[Additional filters available to purchase separately]

The Envirus Everyday Mask is easy breathing, flexible and comfortable. Specifically designed to be used for long periods every day. The mask has two layers; the material is “splash” resistant. 

NEW The Everyday mask features a slot in which a filter may be added. 1 filter is included with purchase.
For greater water repellency and protection, we recommend Envirus Hydrophobic masks.

Features:

Nose Bridge: The bridge of the nose is a point of leakage that affects many masks. We have inserted a mouldable, comfortable nose bridge to ensure a better fit and minimise leakage. Just squeeze gently and push onto the nose and against the face to mould the mask to your face.

Lightweight: The Everyday mask is a two-layer, lightweight design. Aimed to provide protection as well as be comfortable and easy breathing. For further protection, we recommend the Hydrophobic Black or blue masks. (Note in order to provide protection there will be some resistance)

Over the head straps: Envirus have tested many designs including around the ears. In our experience over the head designs are more comfortable. Staff working in the mask construction area are required to wear masks during manufacture and are wearing them for a large part of the day.

Flexible and adjustable elastic: We use a thicker high quality elastic which is flexible and provides a comfortable fit. The elastic features an adjustable strap to accommodate various face sizes. 

Durability: We have tested the hydrophobic masks for 30 Industrial Wash Cycles at over 60 degrees and 30 drying cycles. Masks still repelled water and had no apparent degradation of water repellent properties. We would recommend replacing the mask on approximately 30 washes depending on the condition. Water droplets should bead on the outer surface.

Fit and comfort:  If you observe people wearing masks in public, you will notice there are often gaps down the side of the nose, under the chin or sides. A well-fitted mask is essential in providing protection. We have used years of tailoring expertise and chosen flexible materials to ensure a comfortable and well fitted mask.

Australian made: At Envirus, you receive the service only a local manufacturer can provide and you support our hard-working Australian staff. We source quality Australian made fabric.

FAQ

Are the masks reusable? Yes, we have tested the Hydrophobic masks for 30 Industrial Wash Cycles. The mask still repelled water and had no apparent degradation of water repellent properties. We would recommend replacing masks in less than 30-50 washes depending on condition.

How many layers are in the mask? The Everyday mask features two layers. Our Hydrophobic mask features two layers with a pouch where a PM2.5 Filter may be added to provide extra protection, essentially applying three layers.

Where are the masks made? The masks are made in Newcastle, NSW by Envirus' team of designers and seamstresses.

Can I wash the PM2.5 filter? No, While the masks are reusable the filters are not designed to be washed. 

Do you make masks for children below the ages of ten? Currently Envirus do not offer facemasks for children below the ages of ten. However, Envirus is a continually evolving brand and is currently developing further products. Stay on the lookout for updates.

Will my mask be easy to breath through? All facemasks, regardless of the material will provide some degree of increased inhalation and exhalation resistance. Facemasks are designed to create a barrier to limit airborne water particles from passing to or from your mouth or nose and this barrier will create some degree of increased airflow resistance. Multiple layers and greater filtration inherently means greater resistance to breath.  A single layer paper surgical mask will for example have lower inhalation and exhalation resistance than a multi layer fabric mask.     

How do I ensure a good seal? Your Facemask should provide a good seal on all sides to limit  air from entering or escaping. If you have gaps and airflow through the side or bottom of the mask this means airborne water particles can also pass through these gaps.    

Why do ENVIRUS masks not have a valve? At Envirus, we do not recommend the use of valves for the prevention of waterborne particle protection. Valves are generally used in industry dust masks when the prevention of dust entering the mask is the goal. A valve however does not necessarily stop airborne water particles from passing out of the mask during exhalation.    

Nose Breathing vs. Mouth Breathing? When using a mask it is important to try and breathe in through the nose and out through the mouth. Breathing through your nose provides benefits that can help the body fight viral infections. The reason is that your nasal cavities produce the molecule nitric oxide. F

HOW TO WEAR A FACEMASK?

Cloth face masks should be worn in public settings where social distancing measures are difficult to maintain, such as in grocery stores and in areas of significant community based transmission. Masks are considered an additional measure and are not a substitute for other safe practises such as social distancing, proper hand sanitising and testing.

1. Sanitise hands before handling mask
2. Place mask over mouth and nose
3. Pull elastics over head for snug fit
4. Mould nose bridge to fit face
5. Do not touch your mask while wearing it

Remove the mask by lifting off without touching the front of the mask or your face. Wash your hands immediately after removing your mask. If you accidentally touch your mask, wash or sanitize your hands. Wash in hot water with detergent between use and dry.

For more information on fitting masks and best practises head to the world health organisation page

DISCLAIMER

 “There is no guarantee that any mask will protect against infection, or transmission of viruses or diseases, and masks are not a substitute for all other precautions including, but not limited to, seeking professional medical advice, diagnosis or treatment; social distancing; and, proper sanitisation of hands. While we have used the best information available to us, information is evolving on a regular basis and we make no specific claims, or provide any representations or warranties, whether express or implied regarding the effectiveness of the Envirus masks against Coronavirus or any other respiratory illness, or that the Envirus masks protect against or prevent infection or the transmission of viruses or diseases.

Notwithstanding the generality of the above disclaimer, please note that while the fabrics used in creating the Envirus masks have been tested separately and themselves have various characteristics that may be beneficial to protect against infection, or transmission of viruses or diseases, we have not at this stage completed testing of the Envirus masks as a completed product. We therefore make no claims or provide any representations or warranties, whether express or implied regarding any specific approvals for medical or other applications.

CARE INSTRUCTIONS

WASH AT 60 DEGREES USING MILD DETERGENT. NO CHLORINE. NO BLEACH. AVOID ROUGH SURFACES. WARM TO HOT TUMBLE DRY. MADE IN AUSTRALIA.

EVERYDAY MASK: WATER REPELLENT TREATMENT WILL DEGRADE OVER TIME. HYDROPHOPIC MASK: HAS BEEN TESTED AT 30 PLUS WASH CYCLES WITH NO VISIBLE DEGRADATION OF WATER REPELLANCY.