Protect your kayak from the sun when storing it outside with a polyweave storage cover. 

Manufactured in Australia from heavy duty polyweave.

The cover is a rectangular tube, a narrower tube made to fit your surf ski (not as wide as the sea kayak covers), sealed at one end with velcro.

Is it Waterproof?

The cover is primarily for sun protection (& keeps the bugs out!). It is splashproof but as the seams are not sealed it is possible that some water will get in. To prevent this you can consider taping the seams but as the plastic itself is not breathable the unsealed seams do give some minor breathability. Ensure your ski is clean and dry before putting it away. If you are getting water in consider adjusting the bag so the seam or opening is not so exposed. It is also possible that you can add an eyelet for drainage.

The plastic is a stiffer version of polyweave (thicker than the green or blue groundsheet material) - we do not really recommend it for on top of car use - better to get a kayak/surf ski sock (stretch cover). This is not a padded cover, just a simple tubular cover.

Can we make it with the velcro down the long side? Sorry no

How long will it last?

It will last longer than the stretch fabric in the sun. After a couple of years the plastic may start to break down along the edges. It is plastic - it will not last forever but imagine what the sun would be doing to your ski / kayak without it!

Size: 
These covers are made to fit narrower craft - surf skis up to about 135cm in circumference at the widest point (145cm for longer craft) - check your circumference measurement (measure at the widest point of the kayak - see pic) to ensure it will fit. Most surf skis are around 117 to 132cm circumference. Shorter PE skis such as the Epic V5 & V7 are wider. There is a 10-15cm allowance (so it is not a tight fit on wider craft).

* Length of ski - if you are in doubt go longer!
*Max. circumference- There is an allowance of about 10cm above the 135cm circumference so you do not select one that will be too tight (ie. total is 150cm circumference).
Let is know in the comments box at checkout what ski you have & we will add it to the table!

Custom-made covers - we can get a cover made up for you - select "Other" and send us the dimensions (in Comments box). Priced only slightly more than the stock covers as long as the maximum circumference is under 185cm. Allow an extra few days for it to ship, directly from the factory.

Mostly we have stock of the covers in our shop (we have more in the silver polyweave), but it will only take a couple of extra days to manufacture & ship from the factory. If you want to Click & Collect contact us to check we have one on the shelf.
 

The illustration shows a sea kayak in a bag - this is for illustrative purposes - you need to check your craft's circumference to ensure the correct fit.

Colour - White polyweave (we also have silver - separate listing). We may not have the full size range in white as we are exploring the demand from

The cover may ship arrive by courier or Aust Post depending on your location (Aust Post for WA/NT & remoter regions) - if you are not going to be home we suggest a business address or authorise them to leave. Couriers cannot deliver to PO Boxes or Parcel drop. For Authority to leave please state this in the comments section.

Measuring circumference