The Ultimate Kayak & Canoe Cart

When it comes to moving loads over soft sand, wider wheels are not necessarily better. Bulldozers and military tanks use long tracks, reducing the chance of them digging in. SandTrakz puncture free wheels mimic this track system, the outer rim compresses when in use giving a longer track length. On soft sand this reduces how hard you have to pull to move your cart by more than half compared to standard puncture free Kiwi Wheels*! In fact the SandTrakz system is so effective we think it’s better than balloon wheels!

• Half the effort*
• Puncture free
• Fits inside hatches

Whilst they are designed to make life easier on soft surfaces, SandTrakz wheels are great on hard surfaces. Because C-TUG SandTrakz are designed to compress they act like suspension on hard surfaces, making for easy transition from soft to hard surfaces.
Patented, C-Tug SandTrakz Wheels are made in New Zealand.

Features:

• Dismantles in under 20 seconds
• Fits inside kayak hatch
• Tool-free assembly
• Puncture-free SandTrakz wheels
• Light weight 4.6 kg (10 lbs) and easy to handle
• 80kg (180 lbs) static loading (capacity will vary with dynamic loading on different terrains)
• Reinforced composite material
• Thermo-bonded elastomeric hull pads
• Stainless steel reinforced axles
• 2.8m (9 ft) strap with heavy duty buckle
• Adjustable kick-stand

Note:
A C-TUG cart with SandTrakz wheels is effective for loads up to 80kg, but over this weight effect may be reduced
Load should not be stored for long periods on SandTrakz Wheels
Wheels must be washed to remove sand from axle area after each use
Do not leave your SandTrakz wheels in strong sunlight for extended periods

Due to its bulky size, this cart may ship  throgh Australia Post or a courier and is costly to send - please provide street address for Courier delivery (no PO Boxes or Parcel Lockers). Fixed shipping rate per paddle applies - if you are in a remote area or ordering more than one or two carts please contact us for a shipping quote.

CLICK & COLLECT: Select "Pick up in Store" once you have entered you Vic address and use the coupon code PICKUP-TROLLEY

Dimensions:

Materials:

- UV stabilised ABS, acetal and nylon plastic
- UV stabilised santoprene elastomer
- Polyester webbing
- Die cast aluminium cam-lock buckle
- Stainless steel

C-Tug products are designed for the movement of watercraft. They should never be used for the movement of people, either directly, or in or on watercraft or other objects placed on the cart.

The C-Tug is designed to be pulled manually, do not tow with any vehicle, including bicycles – this will void the warranty. 

C-Tug care:

Due to the marine environments where these products may be used, we suggest the following steps to help extend the life of your C-TUG wheels:

1. After use in salt water, sandy areas and dusty conditions, remove the wheels, disassemble and hose down with fresh water. Wash the axle area thoroughly.
2. Do not clean with solvents or solvent based products and avoid commercial cleaning products. Fresh clean water is suitable for cleaning all C-Tug components.
3. Do not leave your C-Tug cart or wheels in strong sunlight for extended periods. While C-Tug is designed for use outdoors but both rubber and thermoplastics will degrade if left in strong sunlight for extended periods.
4. If your C-Tug is fitted with pneumatic tires, do not over inflate them. The recommended maximum inflation pressure is 25 PSI cold. Replace the valve stem caps after inflation

RAILBLAZA C-Tug products are robust, and designed to take the hard work out of getting your watercraft to and from the water. With reasonable care you can expect your C-Tug to serve you well for many years. C-Tug encourages users of C-Tug products to observe safe practice procedures when using products in marine environments.