Kit Includes:

• Rule Bilge Pump 500 GPH
• Outlet (breather vent or 20mm skin fitting)
• Hose 60cm
• Bracket - our new bracket that fits the new Rule pumps

Compact submersible 500 GPH electric pumps for use as a bilge or bait pumps on smaller craft. Totally submersible pump with water cooled, ignition protected motor, stainless steel shaft and snap-off strainer base. Non-automatic - requires a switch to turn on.

This pump is extremely efficient, draws low current and offers high capacity output in a very compact housing, to fit into the smallest available space.

This Kit comes with the new Rule pump with an oval rather than circular profile - does not fit old Rule Pump brackets.  We have created our own bracket rather then use the new oval-profiled Rule bracket as the outlet from the pump would otherwise point into your back (& insufficient room behind the seat on some kayaks).

Outlet: The black breather vent fits the hose a little loosely - we include a piece of clear hose as a sleeve to improve the fit. Small cable ties can tighten the join.
The 20mm white skin fitting is a firm fit on the hose. Warm the hose end in hot water to assist in stretching it over the fitting.

This kit does not include the battery box, battery system or magnetic switch - sold separately or separate listing for the complete kit (excluding batteries).

Tip: The outlet has a small piece of mesh at the top - remove this before installation to prevent clogging with sand, weed etc.