Stainless steel cable lengths to fit to a variety of rudder-control footbraces.
Cable fits inside the cable housing kits and flexible nylon tube that we stock.
Measure from the footbraces to the rudder housing to determine the minimum length you need. Allow for the operational movement of the rudder pedals.
Sizes:
(originally cut in multiples of feet- imperial measurements)
Length in feet | Length in metres |
9.5' | 2.9m |
10.5' | 3.2m |
13' | 3.95-4.0m |
14' | 4.27m |
There may slight variations in lengths
Kit includes:
2x lengths of cable (1/16" diameter)
2x pieces of heat-shrink
2x crimps (swages)*
*In some 9.5' & 10.5' kits there is a crimp (swage) is fitted to the ends (end may be looped), whereas in others the crimp is loose and needs to be fitted using a crimping tool. There is still crimps & heat shrink in the kit in addition to those on the looped end cables.
Some of the 13' kits have the crimp pre-installed.
You may also need thimbles (teardrop shaped eyelet), or the Smart Track CRW kit to avoid the sharp edge of the housing cutting through the cable