Suits Satphones with longer antennas - the body of this case is the same as the 248 Large VHF case but the antenna area is wider to accommodate satphone antennas

The most trusted waterproof VHF cases on the market, since 1983.

Key Features:

• Clear windows on both sides
• You can use your satellite phone normally through the case, it doesn’t interfere with sound or signals
• Protection against water, dust, corrosion, sand and mud
• Like most of our cases, it’ll float if you drop it in the sea
• The seams are high-frequency welded to form a super-strong bond
• The Aquaclip® seal protects and secures your SatCom phone from the elements

The body of this case is the same as the 248 Large VHF case but the antenna area is wider to accommodate satphone antennas

Tip: to get the circumference, add the width to the depth and then multiply this by 2 

Note: the width of the closing mechanism on this Aquapac may make it too wide to fit in your narrow PFD radio pocket (ie. on Kokatat PFDs) - 

How waterproof is it?
*Submersible - protected against continuous immersion to a depth of 10m

Colour: Black with clear colourless panels

Materials: 300mu UV-resistant TPU

Weight - Case: 122g   Lanyard: 7g

Country of Origin: Made in the UK.

Warning
Aquapac's warranty covers this Aquapac only, and not any items you may put inside it. We recommend that you insure the contents separately.

Waterproofness
Our range has been independently tested to international waterproofing standards. However, the waterproofness of your Aquapac depends on your closing and opening it carefully, and on it not being damaged either before or during use. Please follow all instructions carefully.

Before Every Use
Seal something worthless inside, then submerge in a basin to check the waterproofness.

Closing the Case
Make sure that all parts are properly attached. Wipe away any grit or sand, which could hamper the seal. Always turn the levers as far as they will go. They should lock smoothly, if not there may be something impeding the seal.

Opening the Case
Never open your Aquapac in or under water. In order to stop any water getting in when you are opening it, first shake off any water then dry with a towel. Hold the case with the opening at the bottom as you open it.

Ongoing Care
Our materials are strong but can still be punctured. Avoid sharp or abrasive objects and protect from impacts. After regular contact with chlorinated or salt water, or with sun creams, wash in soapy water and then rinse with fresh water. Do not use bleach, alcohol or proprietary cleaners.

Materials
Aquapacs are made from a variety of materials, mostly plastics which make them rustproof. These include TPU, ABS, nylon and polypropylene.

Extreme Temperatures
Although the case material has been UV-stabilized – which means that the plastic shouldn’t be discoloured or broken down by sunlight – the Aquapac won’t protect anything inside it from heat or sunlight. The soft case material is functional and flexible in air temperatures -40ºC to +60ºC (-40ºF to +140ºF), and water temperatures up to +40ºC (+100ºF).

Humidity and Condensation
In humid climates there will be moisture in the air sealed inside the case. Desiccant sachets will absorb the moisture, keeping the contents completely dry. We recommend use of desiccant sachets in all Aquapacs in humid climates. You can purchase spare sachets – see Accessories.

Warning
This is not a toy. It may contain small parts which may be a choking hazard to children under 3. Keep small parts away from children.