Loading... Please wait...The Aquapac Waterproof Insulin Pump Case is designed to protect your pump during daily life and water-based activities — including showering, bathing, and IPX6 protection from water [water sprayed by jets at all angles].
Use is recommended only for very brief immersion — no deeper than 50 cm and no longer than 15 seconds
The Insulin Pump Case range is now available in three sizes to fit all insulin pumps:
Please check the Size Guide below before ordering.
These waterproof cases allow you to bathe, shower, and paddle in water.
Each case comes with a soft, adjustable belt for secure and comfortable wear.
Important: Please review the medical guidance and flow rate testing notes below before purchasing.
The insulin pump cases are not FDA approved for medical use in the USA. However customers can buy the Radio Microphone cases instead which are exactly the same case also available from this site.
Aquapac's Guide to Insulin Pump Cases - Read before you buy
Key Features:
How waterproof is it?
IPX6 - water sprayed by jets at all angles. Use is recommended only for very brief immersion — no deeper than 50 cm and no longer than 15 seconds
Colour: Black with clear colourless panels
Fits:
Waterproof Rating: IPX6 – Protected from strong water jets and brief, shallow submersion (up to 50 cm depth for 15 seconds).
The supplied belt measures 121 cm (47") when fully extended. It can be shortened by trimming to size and heat-sealing the cut end to prevent fraying.
Materials:
Warning - Aquapac's warranty covers this Aquapac only, and not any items you may put inside it. We recommend that you insure the contents separately.
Waterproofness
Aquapac's range has been independently tested to international waterproofing standards. However, the waterproofness of your Aquapac depends on your closing and opening it carefully, and on it not being damaged either before or during use. Please follow all instructions carefully.
Before Every Use
Seal something worthless inside, then submerge in a basin to check the waterproofness.
Closing the Case
Make sure that all parts are properly attached. Wipe away any grit or sand, which could hamper the seal. Always turn the levers as far as they will go. They should lock smoothly, if not there may be something impeding the seal.
Opening the Case
Never open your Aquapac in or under water. In order to stop any water getting in when you are opening it, first shake off any water then dry with a towel. Hold the case with the opening at the bottom as you open it.
Ongoing Care
Our materials are strong but can still be punctured. Avoid sharp or abrasive objects and protect from impacts. After regular contact with chlorinated or salt water, or with sun creams, wash in soapy water and then rinse with fresh water. Do not use bleach, alcohol or proprietary cleaners.
Materials
Aquapacs are made from a variety of materials, mostly plastics which make them rustproof. These include TPU, ABS, nylon and polypropylene.
Extreme Temperatures
Although the case material has been UV-stabilized – which means that the plastic shouldn’t be discoloured or broken down by sunlight – the Aquapac won’t protect anything inside it from heat or sunlight. The soft case material is functional and flexible in air temperatures -40ºC to +60ºC (-40ºF to +140ºF), and water temperatures up to +40ºC (+100ºF).
Humidity and Condensation
In humid climates there will be moisture in the air sealed inside the case. Desiccant sachets will absorb the moisture, keeping the contents completely dry. We recommend use of desiccant sachets in all Aquapacs in humid climates.
Warning
This is not a toy. It may contain small parts which may be a choking hazard to children under 3. Keep small parts away from children.