Rescue loops are an essential part of a whitewater rescue kit suited to un-pinning smaller craft: kayaks, packrafts and canoes using a 3:1 Basic Z-Drag.

Refer to the NRS Z-Drag crib sheet (water resistant paper) for the steps needed to un-pin a stuck kayak. We recommend you review this sheet prior to setting out if it has been a while since your last swiftwater course.

Price is for one loop, made from approx. 6m of 1" (25mm) wide tubular tape and tied with a tape knot into a loop.
(Tubular tape can also be purchased off the roll, by the metre - separate page)

We highly recommend you take a swiftwater rescue course in your local area. Play safe!

 Specifications:

Note breaking strain changes when applied to knotted tapes

--------------------------------------------------

RECOMMENDATION - the items below are not included in the price of this item but we recommend you make up a kit of your own (items sold separately)

Your rescue kit - we recommend you make up a kit comprising:

1x Throw Bag  (various available - BAX Gear, Astral Designs or NRS)
1x sling of 2.5cm (1") tubular webbing (this page or buy by metre & make your own)
2x Prussik Loops made from 8' (2.5m) sections of 5mm cord
2x standard D carabiners
2x locking D carabiners
2x SMC CRx 1" Pulley
1x NRS Z-Drag crib sheet
1x Fox 40 or Storm whistle

All components of the recommended kit are available to be purchased separately.